|.||THE FACTORIES ACT [Act No. 63 of 1948] As amended by the Factories (Amendment) Act, 1987]||.|
|.||CHAPTER IV, Safety||.|
22. Work on or near machinery in motion
54[(1) Where in any factory it becomes necessary to examine any part of machinery referred to in section 21, while the machinery is in motion, or, as a result of such examination, to carry out-
(a) in a case referred to in clause (i) of the proviso to sub-section (1) of section 21, lubrication or other adjusting operation; or
(b) in a case referred to in clause (ii) of the proviso aforesaid, any mounting or shipping of belts or lubrication or other adjusting operation, while the machinery is in motion, such examination or operation shall be made or carried out only by a specially trained adult male worker wearing tight fitting clothing (which shall be supplied by the occupier) whose name has been recorded in the register prescribed in this behalf and who has been furnished with a certificate of his appointment, and while he is engaged, -
(a) such worker shall not handle a belt at moving pulley unless -
(b) without prejudice to any other provision of this Act relating to the fencing of machinery, every set screw, bolt and key on any revolving shaft, spindle, wheel or pinion, and all spur, worm and other toothed or friction gearing in motion with which such worker would otherwise be liable to come into contract, shall be securely fenced to prevent such contact.
55[(2)No woman or young person shall be allowed to clean, lubricate or adjust any part of a prime-mover or of any transmission machinery while prime-mover or transmission machinery is in motion, or to clean, lubricate or adjust any part of any machine if the cleaning, lubrication or adjustment thereof would expose the woman or young person to risk injury from any moving part either of that machine or of any adjacent machinery.
(3) The ![State] Government may, by notification in the Official Gazette prohibit, in any specified factory or class or description of factories, the cleaning lubricating or adjusting by any person of specified parts of machinery when those parts are in motion.
54. Opening paragraph
and Cl.(s) Subs. by Act 94 oof 1976